Camera + USB DVR recording System

4 CHANNEL

USB DVR SURVEILLANCE SYSTEM

SURVEILLANCE SYSTEM  designed for home/office/shop surveillance or baby care purpose, with a nanny cam; Very User-friendly, easy installation.   Supports stable digitize video record and easily manages the recorded data via index of date and time.

Features:

• Surveillance Security Setup DIY
• Easy to use
• Real time remote monitoring
• Alarm notification by e-mail or mobile phone (The mobile phone needs to be able to receive mail)
• Dynamic IP acceptable
• Internet security remote control
• Image Compression Format: MPEG 4
• Dynamic mask on motion-detection area of multi-camera (one ~ four)
• Can backup to the HD, CD-RW or DVD-RAM
• Audio (one channel)
• Remote monitoring service center
• Detection Sensitivity adjustment
• Instant alarm notification
• Recyclable over ride of hard disk space on FIFO (Fist-in-Fist out)

Specifications:

• Recording Mode: 24H Recycle recording (Schedule recording)
• Multi-task Functional: Monitoring, Recording, Motion detection, and Remote transmission are all-function at the same time.
• Backup Function: Backup image files via HDD, DVD-RAM, or CD-RW.
• Motion Detection: Easy recognition and recording of moving objects. Manually adjust unlimited motion detection areas.
• Alarm Feature: Local: Warning sounds. Email: Sending the alarm event's picture through Internet.
• Recording Format: ASF (advance stream format): WMV
• Compression Technology: MPEG-4
• Audio Recording: Enable record 1 channel audio
• Image Adjustment: Enable adjusts brightness, contract, hue, and saturation of each camera.
• Authority control: Access control for total security operation through multi-level passwords.
• Networking Capabilities: Enable integrated access via PSTN, ISDN, LAN, and Internet.
• Remote Monitoring: Support remote monitoring via both Dynamic and Static IP

Requirements:

• USB: Compliant USB V1.1 / 2.0 free port
• OS: Windows 98 / 98SE / ME / 2000 / XP
• CPU: Pentium III above
• Memory: 128MB or more (Recommend 256MB DDR or more)
• Graphics: PCI/AGP bus with 16MB graphic memory or more XGA 1024+768@24bit color or higher Microsoft Direct X 8.0 or higher version
• Audio: Full-duplex sound card or integrated chip
• Hard Disk: 20GB or above for image storage
• Backup Storage: CD-RW W24X or above; DVD-RAM/RW
• LAN: 10/100 BASE-TX Ethernet card or integrated chip

Color pinhole Camera

comes with power supply and 65feet of cable.

COLOR camera PCBModule with SONY 1/4" Super HAD CCD sensor.
Employs Digital Signal Processor (DSP) IC for image control.
Pixel number : NTSC=270,000 / PAL=320,000.
High sensitivity, low smear, excellent anti-blooming, and high S/N ratio.
Supports functions: Auto Electronic Shutter (AES), Auto Iris Control (AIC), Autoain Control (AGC), Auto White Balance (AWB), Back Light Compensation (BLC),Flicker Less (FL), built-in Audio (optional).
Built-in anti-aliasing and IR-cut optical filter.
Furnished with Mini Lens.
Furnished with power and signals connect wire.
DC type, low power consumption. Economical, aesthetic.

SPECIFICATIONS

Image Pick-up Device SONY 1/4" interline transfer CCD sensor
Effective Picture Elements NTSC:510*492, PAL: 500*582 (H*V)
Horizontal Resolution 330 TV lines
Minimum Illumination 0.5 LUX @ F2.0
S/N Ratio More than 48 dB
Auto Electronic Shutter NTSC:1/60s~1/100,000s, PAL:1/50s~1/110,000s. ON / OFFSwitch-able.
Auto Iris Control Video-Drive Iris Control.
Auto Gain Control High / Low Switch-able.
Auto White Balance Color Temperature: 2500K~9500K.
Back Light Compensation ON / OFF Switch-able.
Flicker Less Mode ON/OFF Switch-able. Fix shutter speed: NTSC=1/100s,PAL=1/120s.
Gama Characteristic 0.45
Synchronous System Internal, Negative sync.
Video Output 1 Vp-p / 75 Ohms.
Audio Function (optional) 2 Vp-p / 50 Ohms.
Power Supply 12V DC ? 10%
Power Consumption 1.44W / 120mA
Lens Furnished Corn-type Pin Hole Lens f 3.7 mm / F2.0 (optional: f 4.3 mm)
Operating Temp. -10? to 50? (14? to 122?)

Make it wireless (add Transmitter/Receiver from pull down

 below)